ms121
1. Download SPLat Firmware
Download this firmware file for your controller. More information about the upgrade process can be found in the Knowledge Base.
************************* MS121 Revision History *********************************** * * V4-00 10/8/2012 Initial release, based on MS120 version 3.30. * * V4.10 7/11/2012 The instruction "OBCBSetUp" has been re-instated as it is required by a customer. * * V4.11 16/1/2013 Instructions FixMem16 and SFixMem16 preserve W. Bug fixed in MODBUS which would * cause unpredictable results when more than 7 coils were updated using the Force Multiple Coils * (function 15) MODBUS command. The board now reports 64K of memory. * * V4.12 10/9/2013 set old crystal pins to outputs * fixed a MODBUS inputs Bug * fixed Xwire lcd type bug * added custom characters to lcd * * V4.13 11/9/2013 fix a bug in LCD custom characters * corected mistake with lcd type bug * * V4.14 31/1/2014 Added SPxPoll1 8,!CPU command to allow a user program to read back the state of the back light. * Command returns a number between 0 - 8 in X in the case of the auto dimming function and either 0 or 8 if * the back light is being driven directly from output 20. * * V4-15 25/6/2015 Added more tasks to the SPLat multitrack environment. This version of firmware can now run up to 50 * tasks (previously 32). Latest Xwire driver and string comms module added. *
2. Download SPLat reFlash
Download then run SPLat reFlash on your PC. This tool will upload the firmware to your SPLat controller. You will need a serial port or USB to serial adaptor and may also need a PC232 programming cable.
Windows 8.x Users
The first time you run reFlash, you will need to do so as the Administrator, otherwise you will see an error about HIRESTIMER.OCX not being registered. After you’ve done this once, you can run it normally in future.
If you’re not sure what you want, give us a call: +61 3 9773 5082
