Access the content and software you need to get started.
Controllers
Special purpose controller especially suitable for Heating and Ventilation Control. All inputs and outputs are 24VAC compliant.
AUD $143.00
The world's most affordable solution in applications that require plain digital I/O and 2 analog inputs in a ready to wire in format. The CC18 replaces the CC16 - more functionality, same price and form factor.
AUD $59.00
DIN Mount Controller with 8 x analogue inputs, 2 x analogue out, 4 x digital i/o, 1 x TTL serial and 1 x RS485 port.
AUD $95.00
DIN Mount Controller with 2 x 16 character backlit LCD, 4 x buttons, real time clock, 8 x digital i/o, 2 x analogue in, USB, 1 x TTL serial and 1 x RS485 port.
AUD $109.00
DIN Mount Controller with 16 x digital i/o, 2 x analogue in, USB, 1 x TTL serial and 1 x RS485 port.
AUD $125.00
DIN Mount Controller with pH measurement, 2 x digital in, 2 x digital out, USB, 1 x TTL serial and 1 x RS485 port.
AUD $130.00
DIN Mount Controller with 8 x mains rated relay outputs, 8 x opto digital in, USB, 1 x TTL serial and 1 x RS485 port.
AUD $145.00
DIN Mount Controller with 8 x mains rated relay outputs, 8 x opto digital in, 1 x 0-10 Volt analogue, 1 x USB, 1 x TTL serial and 1 x RS485 port.
AUD $167.00
DIN Mount Controller with 8 x N/O relay outputs, 4 x digital in, USB, 1 x TTL serial and 1 x RS485 port.
AUD $115.00
AUD $151.00
DIN Mount Controller for load cells / strain gauges, USB, 1 x TTL serial and 1 x RS485 port.
AUD $105.00
The EC1 is our first product aimed at the non-industrial users. It is also our first 32-bit off the shelf microcontroller board (we routinely make custom 32-bit SPLat controllers).
The HD8 is a very low cost way of getting a controller with basic user interface. It was developed for applications like custom temperature controllers, where some customized logic is needed in addition to the basic setpoint function.
AUD $89.00
4.3" touch screen controller with 8 x digital, 2 x analogue, 2 x serial and 1 x RS485 ports. Programming and image transfer via USB.
AUD $198.00
7" touch screen controller with 8 x digital, 2 x analogue, 2 x serial (inc 1 x RS232) and 1 x RS485 ports. Programming and image transfer via USB.
AUD $269.00
HVAC26A is a CA20 replacement. It is the same size, has the same mounting holes, same connectors and same functionality but is lower cost, lower power, faster, expandable and includes a built-in diagnostic LCD.
AUD $323.00
SPLat pioneered the programmable controller with integral operator interface and user-legendable membrane overlay with the MMi88 back in 1997. The MMi203A continues this product family with enhanced features.
AUD $149.00
The MS121 sets a new standard in cost-effective controls. With an inbuilt operator interface, this little beauty challenges existing perceptions about HMI/controller combos being expensive.
AUD $99.00
An embedded workhorse, the SL100 is the obvious choice if you don't need an operator interface. With 16 digital and 2 analog I/Os, plus many expansion possibilities, this is our most popular model to date.
AUD $139.00
2-channel K-type thermocouple
AUD $119.00
TN9301 non-contact Tn9 temperature sensor, pre-wired to plug directly into the SX10501 and SX10502 boards. Cable length = 250mm.
AUD $73.00
Fully programmable, remote display and user inferface controller. May be an Xwire master or slave and communicate with other peripherals or controllers in a network.
AUD $80.00
AUD $129.00
Solar hot water controller. Sold only as a spare part. Not for new designs.
AUD $68.00