Before you can program your SPLat controller and Kaspro HMI you will need the programming files. The demo software files can be found here.

1. Click the link above, download and save the file where you can find it. You will get a zip file with a name “MMi Master to Kaspro Demo.zip”
2. If your Windows version has zip support enabled, all you need to do is open (double click) the downloaded zip file/folder and drag and drop the folders “KasproDemo_1” and “SplatDemo_1” to a location where you can easily access them.
   Or if you have an archive program installed on your PC you can use that to extract the contents of “MMi Master to Kaspro Demo.zip” to a location where you can easily access them.

Programming the SPLat

Translate and download the SPLat Master Demo program “KasproDemo_1.SPT” into the MMi202 via SPLat/PC. Downloading instructions are in the classic help file.

Programming the Kaspro

Locate the Kaspro Project directory SPLatDemo_1. Inside this directory will be a file called “SPLatDemo_1.wpj”. Open it with the KA-Software. Download the Kaspro Slave demo program “SPLatDemo_1.wpj” into the Kaspro via the KA-Software. See the Kaspro manual.